port forwarding on RV220W

[transparentfox]

Hello,

Is it possible to configure the RV220W to forward ports without connecting to the SSL VPN?

If so, how?

Thanks,

Dave

[paolo bevilacqua]

Wrong forum, try small business routers.

[mpyhala]

Hi David,

Thank you for posting. Go to Firewall-> Access Control-> Custom Services. Create a new service for the port that you want to forward. Then go to IPv4 Firewall Rules-> Add.

From Zone: Untrusted (WAN)

To Zone: Trusted (LAN)

Service: (Select from the dropdown. If you created a service it will be at the bottom)

Action: Always Allow

Source Hosts: Any

Send to Local Server (DNAT IP): 192.168.1.200 (Use LAN IP of the device to forward to)

Remember to Save Settings when you are done.

[lowmsh]

Hello Guys,

The admin page to my newly purchased RV220W has always encountered with a certificate error. Anyway I could still login ignoring this issue. However after configuring port forwarding as i did for my WRVS4400N, it didn't work at all. What could be wrong ? I done my port forwarding step similar to mpyhala highlighted.

[mpyhala]

Hello M S Low,

Thank you for posting. What firmware is on the RV220W?

[lowmsh]

Hi mpyhala,

The firmware version now is 1.0.2.4

[mpyhala]

Hello,

Did you create the rule under IPv4 Firewall Rules or Port Forwarding? There is a known issue and Port Forwarding does not work correctly. You can do the same thing under Firewall Rules and you will have success.

[lowmsh]

Hi,

i created the rules under the Firewall - Port Forwarding, not IPv4 Firewall Rules. But i still could not get them to work.

btw, under 1.0.2.4 firmware, port forwarding can only be found under Firewall, not under Networking, LAN (Local Network), IPv4 LAN (Local Network).

[mpyhala]

Hi,

Delete any rules you created under Port Forwarding and recreate them in IPv4 Firewall Rules. This should resolve the issue. Hopefully "Port Forwarding" will be fixed in the next firmware.

[jtodd1976]

Maybe it's just me...but you'd think this type of router wouldn't have port forwarding issues! After upgrading to the latest firmware (1.0.2.4), I wondered why I couldn't get my port forwarding to work. Something so trivial shouldn't even be an issue with this router. Just my opinion. Thanks for the work around till the next firware release.