cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1535
Views
0
Helpful
1
Replies
Beginner

port hanging problem on router

Hi friends

This is Satwinder. I am facing a unique problem in my layer 2 switched network.

We have configured in Vlan.

The problem is that the after a particular interval of time....the data traffice is getting decreased on port and ultimately stops data transfer.

After shutting /no shutting traffice starts again.

We have configured the port to control broadcast...

The configuration is on router of this port is

interface FastEthernet0/1/4

switchport access vlan 11

switchport protected

load-interval 30

storm-control broadcast level 90.00

storm-control action shutdown

Pls help.....

1 REPLY 1
Enthusiast

port hanging problem on router

Remove the storm-control command from the interface  or increse the threshold level

The storm control action occurs when traffic utilization reaches this level and the port will shutdown as per your config

http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_22ea/SCG/swtrafc.html

Regards

Haris P

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards