06-27-2009
10:53 AM
- last edited on
03-25-2019
03:25 PM
by
ciscomoderator
-----QUESTIONS-----
⢠Configure the link between ROUTER _4 and ROUTER_5 using PPP encapsulation.
⢠Configure ROUTER_4 to request ROUTER_5 to authenticate via PPP.
⢠ROUTER_5 should respond with the username ROUTER5 and the clear-text
password CISCO.
⢠Configure ROUTE_5 to request ROUTER_4 to authenticate via PPP.
⢠ROUTER_4 should reply with the username ROUTER4 and an MD5 hash value that
represents the password CISCO.
--------ANSWER----------
R4:
username ROUTER5 password 0 CISCO
!
interface Serial0/1
encapsulation ppp
ppp authentication pap
R5:
username ROUTER4 password 0 CISCO
!
interface Serial0/1
encapsulation ppp
clockrate 64000
ppp authentication chap
ppp pap sent-username ROUTER5 password 0 CISCO
--------
My question is this, since ROUTER5 is requestin R4 to authenticate through CHAP.
Don't I need to configure below on ROUTER 4 serial interface...
ppp chap hostname ROUTER4
ppp chap password CISCO
Solved! Go to Solution.
06-28-2009 10:27 AM
Kennie,
You need because the router will use hostname by default.
HTH,
Toshi
06-27-2009 05:46 PM
You do unless the hostname of the router itself is ROUTER4.
___
Edison.
06-28-2009 10:27 AM
Kennie,
You need because the router will use hostname by default.
HTH,
Toshi
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide