03-19-2019 05:47 PM
I have a PPPoE link between 2 routers that passes through 2 switches that does not connect. The link without PPPoE works through the switches. Below, I copied key configs of both routers for them to be looked at. Why is the link not working?
R1:
hostname huss0036_L04_R1
username Cust1 password 0 ciscopppoe
bba-group pppoe global
virtual-template 1
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
!
interface Virtual-Template1
mtu 1492
ip address 204.190.111.1 255.255.255.248
peer default ip address pool POOLoE
ppp authentication pap callin
interface Dialer1
no ip address
shutdown
ip local pool POOLoE 204.190.111.2 204.190.111.6
ip forward-protocol nd
<other configs left out>
R4:
hostname huss0036_L04_R4
interface FastEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface Dialer1
ip address negotiated
ip mtu 1492
encapsulation ppp
ppp pap sent-username Cust1 password 0 ciscopppoe
!
03-19-2019 06:30 PM
Hi @NaderHussain ,
Maybe this link can give you some help:
https://learningnetwork.cisco.com/docs/DOC-27502
Regards
03-20-2019 04:54 AM
Hello
R1
interface Virtual-Template1
ppp authentication chap
ppp chap hostname huss0036_L04_R1
R4
username Cust1 password 0 ciscopppoe
interface Dialer1
ppp authentication chap
ppp chap hostname huss0036_L04_R4
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide