cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
369
Views
2
Helpful
4
Replies

PPPoE server - ghost sessions

dominiaz
Level 1
Level 1

I have a problem with pppoe server ghosts sessions:

 

C        172.16.1.116 is directly connected, Virtual-Access2.7
                      is directly connected, Virtual-Access2.6
                      is directly connected, Virtual-Access2.5
                      is directly connected, Virtual-Access2.4
                      is directly connected, Virtual-Access2.3
                      is directly connected, Virtual-Access2.2
                      is directly connected, Virtual-Access2.1

 

PPPoE server configuration:

 

bba-group pppoe global
 virtual-template 1
 sessions per-vc limit 32000
 sessions per-mac limit 32000
 sessions per-vlan limit 32000 inner 32000
 sessions auto cleanup

interface Virtual-Template1
 mtu 1492
 ip unnumbered Loopback0
 ip nat inside
 ip tcp adjust-mss 1452
 no logging event link-status
 no peer default ip address
 keepalive 30
 ppp mtu adaptive
 ppp authentication chap ms-chap-v2

 

 

4 Replies 4

What excatly you issue here?

MHM

dominiaz
Level 1
Level 1

Why 1 client with 1 IP - 172.16.1.116 is connected to 7 Virtual-Access interfaces at 1 time?

I will check it'

You are right you must see only one VCI.

MHM

Hello
what makes you think these are ghost interfaces - do you have a virtual profile if so these VT interface could be multiple user connections? 


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul
Review Cisco Networking for a $25 gift card