We are using SDM link between to router.
COnfig on router 1
====================
ip cef
inte gig0/1
ip ADDRESS 1.1.1.1 25.0.0.0
ip load shareing per-packet
no ip proxy-arp
no ip mroute-cache
no autonegotiation
load-interval 30
dulpex full
speed 100
media type RJ45
inte gig0/0
ip ADDRESS 2.2.2.1 25.0.0.0
ip load shareing per-packet
no ip proxy-arp
no ip mroute-cache
no autonegotiation
load-interval 30
dulpex full
speed 100
media type RJ45
ip route 172.16.2.0 255.255.255.0 1.1.1.2
ip route 172.16.2.0 255.255.255.0 2.2.2.2
===================
COnfig on router2
===================
ip cef
inte gig0/1
ip ADDRESS 1.1.1.2 25.0.0.0
ip load shareing per-packet
no ip proxy-arp
no ip mroute-cache
no autonegotiation
load-interval 30
dulpex full
speed 100
media type RJ45
inte gig0/0
ip ADDRESS 2.2.2.2 25.0.0.0
ip load shareing per-packet
no ip proxy-arp
no ip mroute-cache
no autonegotiation
load-interval 30
dulpex full
speed 100
media type RJ45
ip route 172.16.1.0 255.255.255.0 1.1.1.1
ip route 172.16.1.0 255.255.255.0 2.2.2.1
Now with this config...
When i m sending 100 packet from HOST A to HOST B then as per me 50 should go on one link and another 50 should go on another link.
BUT here only 20 packet will go on one link and another 20 are going on another link........Due to this to go 100 packet from HOST A to HOST B i m getting
latencey............i.e. i m geting low thoughput.
If i remove one link then i m geting 100% thoughput on the remained link.
PLease let me know where is root cause of problem ?If u are haveing any alternate solutions for same (to load balance )let me know.
==========SEE ATTACHMENT FOR TOPLOGY=========
