Problem with Cisco Rv110w.

[Mherweb]

After power on, the power light starting flash and not working.

What to do?

[Julio E. Moisa]

Hi

Try to reset the devices, pressing the reset button around 10 seconds. It will reset to factory settings. 

http://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv110w/administration/guide/rv110w_admin.pdf

Please rate the comment if it is useful

:-)

[Mherweb]

When I press the reset button, no action.

[Julio E. Moisa]

Hi

If nothing happened after reset the device for around more than 60 sec and you have warranty it should be verified with the vendor.