QOS 2960 dscp

[hamza.admas1]

Hello, 

Can someone explain to me what does mean the following commands please : 

mls qos map cos-dscp 0 8 16 24 32 46 48 56
mls qos srr-queue output cos-map queue 1 threshold 3 5
mls qos srr-queue output cos-map queue 2 threshold 3 3 6 7
mls qos srr-queue output cos-map queue 3 threshold 3 2 4
mls qos srr-queue output cos-map queue 4 threshold 2 1
mls qos srr-queue output cos-map queue 4 threshold 3 0
mls qos srr-queue output dscp-map queue 1 threshold 3 40 41 42 43 44 45 46 47
mls qos srr-queue output dscp-map queue 2 threshold 3 24 25 26 27 28 29 30 31
mls qos srr-queue output dscp-map queue 2 threshold 3 48 49 50 51 52 53 54 55
mls qos srr-queue output dscp-map queue 2 threshold 3 56 57 58 59 60 61 62 63
mls qos srr-queue output dscp-map queue 3 threshold 3 16 17 18 19 20 21 22 23
mls qos srr-queue output dscp-map queue 3 threshold 3 32 33 34 35 36 37 38 39
mls qos srr-queue output dscp-map queue 4 threshold 1 8
mls qos srr-queue output dscp-map queue 4 threshold 2 9 10 11 12 13 14 15
mls qos srr-queue output dscp-map queue 4 threshold 3 0 1 2 3 4 5 6 7
mls qos queue-set output 1 threshold 1 138 138 92 138
mls qos queue-set output 1 threshold 4 20 50 67 400
mls qos queue-set output 2 threshold 1 149 149 100 149
mls qos queue-set output 2 threshold 2 118 118 100 235

Thank you so much for your Help !!! 

Regards, 

[fbabashahi]

Hi 

mls qos srr-queue is for mapping you can find description about it from following link: Mapping Tables

mls qos queue-set is according to cisco explanation in following link  Queueing and Scheduling on Egress Queues

---

You guarantee the availability of buffers, set drop thresholds, and configure the maximum memory allocation for a queue-set by using the mls qos queue-set output qset-id threshold queue-id drop-threshold1 drop-threshold2 reserved-threshold maximum-threshold global configuration command.

[Deepak Kumar]

mls qos map cos-dscp 0 8 16 24 32 46 48 56

To define the ingress Class of Service (CoS)-to-differentiated services code point (DSCP) map for trusted interfaces, use the mls qos map cos-dscp command in global configuration mode. Use the no form of this command to remove a prior entry.

mls qos map cos-dscp dscp1...dscp8

COS	0	1	2	3	4	5	6	7
DSCP	0	8	16	24	32	40	48	56

with the following command you map a cos value 5  to queue 1 thresshold 3:

mls qos srr-queue output cos-map queue 1 threshold 3 5

All commands are part of QoS configuration.

Regards,

Deepak Kumar