06-24-2010 12:36 PM - edited 03-04-2019 08:53 AM
Does anyone know if the ip precendence command is available in Cisco IOS Software, C2600 Software (C2600-TELCO-M), Version 12.4(19b), RELEASE SOFTWARE (fc1). c2600-telco-mz.124-19b.bin"
Thank you
06-24-2010 12:47 PM
Hello Ikadlik,
you should be able to use match ip precedence or match precedence or set ip precedence or set precedence inside route-maps or policy-maps
the command without the ip can apply to IPv6 packets also, the command with the ip keyword should apply only to IPv4 packets
see
The match ip precedence command is replaced by the match precedence command. See the match precedence command for more information.
http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_m1.html#wp1034932
http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_m1.html#wp1035353
http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_s1.html#wp1059755
it looks like some modern IOS support only the version without the ip keyword
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community