cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
332
Views
0
Helpful
1
Replies
Highlighted
Beginner

QOS on 4500 Switch

I am looking to enable QOS on a 4500 Switch with the following specifications:

Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.04.00.SG RELEASE SOFTWARE (fc3) /with Sup 7-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP7-E CAT1639L46S

I have configured QOS on the 3750 switches but this seems to be a bit different. Can anyone shed a bit of light on the subject.

Another quick question when you enable QOS globally on a device does it automatically create the ingress and egress queues and the SRR information?

Thanks in advance,

Desmond

1 REPLY 1
Highlighted
VIP Mentor

Hello
Please review the cco doc for 4500 qos
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/54sg/configuration/guide/qos.html

Regards your query about ingress/regress queues and SRR- nothing suggests this occurs when you globally enable qos

Res
Pul

Sent from Cisco Technical Support iPad App



kind regards
Paul

Please rate and mark posts accordingly if you have found any of the information provided useful.
It will hopefully assist others with similar issues in the future
Content for Community-Ad