Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am setting up vpn on an asa and I am receiving issue on the vpn client log and not able to connect. Cisco Systems VPN Client Version 5.0.07.0290Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.Client Type(s): Windows, WinNTRunning on...
I have configured an ASA 5520 and I configured and inside and an outside interface.From the asa I can ping the internet (8.8.8.8) and also the internal network computers. From my internal laptop I can ping internal computers and the inside interface ...
I am looking for Layer 3 redundancy for my design and I am not sure about how to set it up. I think based on my current design I will have to use OSPF costing to ensure that the primary link is always primary. I dont see a way of using HSRP since the...
I am looking to enable QOS on a 4500 Switch with the following specifications: Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.04.00.SG RELEASE SOFTWARE (fc3) /with Sup 7-E 10GE (SFP+), 1000B...
I have a Cisco 4507 switch plugged into a Websense device. Analysis of VoIP traffic has shown that QoS DSCP values are preserved across switchports until reaching the Websense appliance, attached to the switch, at which point they are discarded. Prop...
I must be totally missing something. I receive a connection by the lock located on the bottom right hand corner. I do an ipconfig and I receive an ip from the local pool specified (10.31.1.11) . On the ASADEKALB-ASA# sh crypto ipsec sainterface: OUTS...
Hello Marvin, Yes I have checked that on both. I have changed the previous configuration to the one below and the vpn now connects but it does not allow me to connect to any local networks. The vpn client has nothing listed under local Lan and also s...
