Hey Guys,
I'm planning for a service provider network QoS. My customer has ASR 1002x for its BRASs and has about 15k PPPoE users on each BRAS. In order to serve a better service to users, my customer decided to run QoS on the downstream traffic toward users. What I have done till now is very simple as bellow:
policy-map PLM
class 4C-REAL
priority percent 10
class class-default
bandwidth percent 90
random-detect
policy-map PLM-PR
class 4C-PERMIT
police 8000 conform-action transmit exceed-action transmit violate-action transmit
class 4C-REAL
priority percent 10
class class-default
bandwidth percent 90
random-detect
policy-map 3839
class class-default
shape peak 10000 100000 100000 // Numbers are not accurate
service-policy PLM
policy-map 3840
class class-default
shape peak 10000 100000 1000000 // Numbers are not accurate
service-policy PLM-PR
My problem is that my router reloads after some hours even I put only 2k users on it. I check Memory, CPU usages but they are less than 10 percent. I also checked my total active queues, but they are about 4000 queues which is much lower than router capability. The error that cause the reload is "watchdog" in earlier IOSs or "Software Crticial Error" in newest IOSs (in show ver result). Please check my scenario and give me a solution to do it.
Best Regards,
Mahdi
