I have a client that has WS-6500 in VSS with NSF. By deleting the command distance eigrp 90 90, the neighboring devices resynchronized their eigrp adyacency. After this, the metrics appeared as infinity, causing an instability in the network. Why thi...
Forum Posts
Is there an equivalent to the junos command? jtac@Router-RE0# show routing-options interface-routes { family inet { export { lan; point-to-point; } }}...
Hi, In a nutshell, I have two routers (R1 and R2). There are two paths between the two: one is a point to point VPN using static routes, and the other is EIGRP via a couple other hops. ...sorry for the oversimplification.... Basically, I want tra...
Hi All, Is there any command for snmp to send traps when temperature raise or fall from defined threshold on ASR100 series router? or Is this something happen by default by enabling 'snmp-server enable traps alarms' command? Regards, Godwin. S
I have a client with a request that he wants some websites to be view on his network. Currently all access to www has been block with access list below: !ip nat inside source list 101 interface GigabitEthernet0/1 overloadip route 0.0.0.0 0.0.0.0...
Hi everyone. Our company is running metro-Ethernet service that is connecting customers to edge switch at several locations. In most of them we are using 3750 switch and for internet connection for clients we want to rate-limit. One sample interface...
My web site map with one of the ISP1 public 100.1.1.1 now I'm planing to take 2nd ISP2 so ISP1 go down my website work with ISP2. how can i achieved this can any one suggest problem is both ISP is different and they are not ready to publish each othe...
Hello, We have two ASA 5505 8 port, basic licence devices that are used to allow a third party VPN to interface with systems on our network. Currently 3 of the 8 ports are connected an in use. One port is the local interface, another port is an o...
is there a way to do multiple destinations on netflow data on interfaces? I'm trying to do this because we need to extract outside and inside. i am not finding any reference to it and it looks like i can't do it.
Hi, I've been having major issues getting WCCP and the Zone Based Firewall working together on an ISR4331. To rule out the Zone Based Firewall, I've removed all of its configuration. I still can't get WCCP to work! Clients are on 10.10.0.0/16, t...
Hey all, My current ISR's are having multiple technology packages , now im upgrading to a new set of ISR's with a new IOS version. How do i transfer these package licenses to my new ISR? Any thoughts ? Thanks
Hi AllIs it possible in IOS to have for a particular subnet:a) Two static routes?b) Make one static route a higher priority than the other?c) If one static router "goes down", failover to the lower priority static route?We have a l2tp/vpdn connection...
Never mind my fault was very silly issue and I need to delete this topic but I don't see any delete button!
Hi, I am currently using C3750X-24T-S model with the firmware version of 12.2(55)SE5. I had activated my license with "ipservices"as because WCCP configuration will require either IP Services or Advance IP Services feature set as stated in the datash...
Hi there, We are looking at implementing load balancing between 2 different MPLS carriers for all of our centers globally. In the U.S. there's no problem as we are all connected to the same AS for MPLS1 and MPLS2. However, in APAC, EMEA, LATAMS reg...
