I have several routers connected to US Robotic modems through the AUX port. Most of them run fine. Today however I am trying to setup a new ASR and the modem picks up and looks like it connects but I get no screen back. I have the same configuration I have on all other routers
Line aux
exec-timeout 0 0
modem dialin
modem autoconfigure type usr_courier
transport input all
speed 11500
flowcontrol hardware
I started with the US Robotics with dip switch 3,7 down then added 3,7,8 and still always the same. It seems to connect but no screen.
