remove the following (ip nat translation) from Configuration

[Mohamed246]

Hi,

I want to remove the following (ip nat translation) from Configuration on my Cisco C1111 router

Pro Inside global Inside local Outside local Outside global
tcp 41.128.245.170:59538 192.168.1.89:59538 157.185.188.1:443 157.185.188.1:443

i am try this command
no ip nat inside source static tcp 192.168.1.89 59538 41.128.245.170 59538 outside source static tcp 157.185.188.1 443 157.185.188.1 443

but i got this message
% Invalid input detected at '^' marker. (refer to outside in the command)

i need help to remove this

[Georg Pauwen]

Hello,

post the running configuration of your router.

You can only type:

--> no ip nat inside source static tcp 192.168.1.89 59538 41.128.245.170 59538

-->no ip nat outside source static tcp 157.185.188.1 443 157.185.188.1 443

as two different lines...

[paul driver]

hello
try the following:
no ip nat inside source static tcp 192.168.1.89 59538 41.128.245.170 59538 extendable

[Mohamed246]

Thank you for reply, 

But i Got the message "%Translation not found"

[paul driver]

Hello

Can you post the output:

sh run | in nat
sh ip nat nvi translations
sh ip nat translations

[Mohamed246]

Hello,

the output of these commands showes all the ports which I have opened in my router ,so it is a critical data i cannot post it as a public

I have cleared it from the screenshot,

I think that the translations which are outside are opened by the router automatically to allow users to access internet sites like facebook and google ,etc ... , right  ?

[paul driver · Accepted solution]

Hello

the OP stated you wish to delete what seems to be a static Nat statement and presently you are not able to do so

So can you post the Nat configuration and if need be remove/hide the public addressing if any is showing

[Mohamed246]

Thank you Mr. Paul.