cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
251
Views
0
Helpful
1
Replies

Rendezvous points ACI

Sarafianl1980
Beginner
Beginner

Hello,

I'm looking at migrations from Nexus 7 to ACI v4.21.  

On the nexus there is a RP statement setup as:

ip pim rp-address 10.2.1.1 group-list 239.255.1.0/24

On the ACI I'm not clear on how to create the same? Any guides or advise on how to do this please?

Thanks

1 Reply 1

disales
Cisco Employee
Cisco Employee

Hello there @Sarafianl1980 ,

here is the link for the configuration of static RP inside ACI using the GUI.


https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/L3-configuration/Cisco-APIC-Layer-3-Networking-Configuration-Guide-42x/Cisco-APIC-Layer-3-Networking-Configuration-Guide-42x_chapter_010011.html#id_21333

and here are some good information about multicast inside of ACI:

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/L3-configuration/Cisco-APIC-Layer-3-Networking-Configuration-Guide-42x/Cisco-APIC-Layer-3-Networking-Configuration-Guide-42x_chapter_010011.html


If you find my reply solved your question or issue, kindly click the 'Accept as Solution' button and vote it as helpful.

You can also learn more about Cisco ACI through our live Ask the Experts (ATXs) session. Check out the ATXs Resources [https://community.cisco.com/t5/data-center-and-cloud-knowledge/cisco-aci-ask-the-experts-resources/ta-p/4394491] to view the latest schedule for upcoming sessions, as well as the useful references, e.g. online guides, FAQs.

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers