We have a need to use PBR and route-maps in our environment. The ACL in which we reference the route map looks like
ip access-list extended Live-PBR-1
permit ip host 172.19.0.20 192.0.0.254 30.255.255.0
we have noticed that in testing we only see half the subnets as working. Consistently the odd subnets are unavailable.
We believe our testing has shown that each classfull network needs to be described and using a wildcard mask such as this doesn't work.
Q1. Can we create an object-group on our 65K 12.2(33)SXI to use in the ACL referenced by the PBR config
Q2. Is it possible to use the range command or does each network have to be described with its mask. (we have to desc quite a large range of networks)
Many thanks,
Steve