Hello there, Can I know what is this ACL meant? What is the "established" command for in this ACL?access-list 121 permit tcp host 192.168.1.1 host 172.2.1.1 establishedThank you
Hello there, Can I know what is this ACL meant? What is the "established" command for in this ACL?access-list 121 permit tcp host 192.168.1.1 host 172.2.1.1 establishedThank you
I'm stymied by hierachical QoS on the ASR 1004 platform and am hoping that someone can show me the light.Currently, I have a successful configuration on the ISR 3845 and 2821 platform where I have multiple GRE tunnels each with their own outgoing ser...
Hi,I have the router that is currently configured for one dialer profile and it has the following commands on the bri interface.interface BRI0 encapsulation ppp ppp authentication chap no ip address dialer pool-member 1 isdn switch-type basic-net3Cur...
Hi,Following access list is used in BGP route filtering with "distribute-list Name_Of_Access_List out" comand :ip access-list ex filterdeny ip host 10.10.1.0 host 255.255.255.240 ( /28 subnet )deny ip host 10.10.2.0 host 255.255.255.0 ( / 24 subnet...
Hi there,I have two sites with a Cisco 3825 each. Site B is connected to the service provider with a 100 mbps link. Site A is connected with a 400 mbps link as a trunk port because it is use to receive data from other sites. Each site with its own vl...
Dear sirsI have one problem which I can not think a way how to solve it. As you can see from the diagram I have 2 networks . One of the network is running RIP version 1 and the other EIGRP. I want to connect the Switch A to Switch B so both networks...
Hi GuysI've set up ssh on my 3925 router and I would like to allow ssh access from only one physical interface. Is it possible to specify this kind of thing ?Thanks a lot.Best Regards,Nicolas
Hi,Catalyst 3560 supports DHCP server feature, does Catalyst 2960G support DHCP server feature? If so, grateful if you could advise on the configuration (sample config or links are welcome).ThanksAnita
We are in the process of creating a WAN Distribution layer. Prior to implementation, we would redistribute BGP routes learned from our different MPLS carriers into one core EIGRP instance. Our WAN consists of primarily two different routers. One one ...
hi friend,My issue is we have a head office Router at location A , and branch offices Routers at B.C,D . The head office A has 2 smart serial cards(WIC-2T) in which we have connected B in one card and C and D to other . Now when the Branch office ...
Hi,I have 3 sites. 2 sites were IPVPN connections provided by service provider through their MPLS cloud and the 3rd one was P2P DLL lease Line.I recieved new lines from the same ISP for the sites and this time all 3 will be connected to the ISP and t...
Hi,We are using 2 internet links on ASA--5550. Right now default route is towards primary ISP and only Static routes are in use towards second link.Is it possible to shift Remote VPN users traffic on second link with current setup. Regards,Prince
I have attached a diagram, but here is the description:Putting 2 x 2821 in a datacenter, they are providing 2 ethernet cables for WAN/Internet with a single default gateway for us to route our traffic to.Behind my 2 x 2821 I have a publicly routable ...
Can someone give me a site(cisco) to download latest FTP server??
HelloIf anyone has done this before or have ideas please share me youre ideas. We have 2 separate networks and suddenlydecided to implement a capability tthat their voip can call each other w/o passing thru PSTN. We gonna put a separatededicated li...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
06-14-2025 01:24 AM | ||
05-12-2025 03:28 PM | ||
05-09-2025 02:25 PM | ||
05-05-2025 11:47 PM | ||
04-22-2025 12:20 PM |
User | Count |
---|---|
9 | |
7 | |
4 | |
4 | |
3 |