cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
316
Views
0
Helpful
4
Replies

Router 4221 WebUI access failed

Hi to everyone,
I have a Cisco Router 4221.

 

firmware:

isr4200-universalk9_ias.17.03.02.SPA.bin

 

I did these commands for enable the webUI


ip dhcp pool WEBUIPool
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 192.168.1.1
username webui privilege 15 password cisco
interface gig 0/0/1
ip address 192.168.1.1 255.255.255.0


I try via browser to "https://192.168.1.1/#/dayZeroRouting" but it doesn't works.

Can someone help me?

Thank you so much

4 Replies 4

balaji.bandi
Hall of Fame
Hall of Fame

Hello

Have you enabled HTTPS secure on the rtr, if not try accessing it via HTTP://192.18.1.1 instead which used to be enabled by default.

Basic HTTPS configuration:
no ip http server
ip http authentication local
ip http secure-server


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

Hi Paul, thank you
The issue was there:

 

"username webui privilege 15 password cisco"

I change with

"username cisco privilege 15 algorithm-type scrypt secret cisco"

 

Now it works

Thank you for supprt

Glad it was username issue becaus of securit you need to have secure password.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco