cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

626
Views
0
Helpful
7
Replies
Highlighted
Beginner

Router 819G - Сellular use wrong profile

Hi all

I have a Cisco 819G Router

In the router has 2 sim cards of different providers.

Prescribe two profiles
specified in the settings of the controller:
controller Cellular 0
  gsm sim profile 2 slot 1
  gsm failovertimer 1
Default sim 0 dials using Profile 1
When activate SIM 1:
"cellular 0 gsm sim activate slot 1"
  attempts occur through dialer profile 1
Profile 2 is inactive.

What could be the problem?

 

If I change the settings for "profile 1", the second Sim successfully dials.

 

chat-script gsm "" "ATDT*99***1#" TIMEOUT 60 "CONNECT"

controller Cellular 0
 gsm sim profile 2 slot 1
 gsm failovertimer 1

 

interface Cellular0
 mtu 1450
 ip address negotiated
 encapsulation ppp
 dialer in-band
 dialer idle-timeout 0
 dialer string gsm
 dialer-group 1
 async mode interactive

line 3
 exec-timeout 0 0
 script dialer gsm
 logging synchronous
 modem InOut
 no exec
 transport input ssh
 transport output ssh

 

 

Everyone's tags (4)
7 REPLIES 7
Frequent Contributor

can you share the " sh cell 0

can you share the " sh cell 0 all" output

 

Beginner

attached output

attached output

Frequent Contributor

Just noted that the  IOS in

Just noted that the  IOS in the 819 must be Mainline 15.3(3)M or later for the dual sim feature to work.

What is your version?

Frequent Contributor

Also have you seen this

Also have you seen this link

http://www.cisco.com/c/en/us/td/docs/routers/access/800/819/software/configuration/Guide/819_SCG/3routconf.html#pgfId-1184491

Beginner

Yes, I read it.I updated IOS

Yes, I read it.
I updated IOS version. Now 15.3. (3) M6.
The settings for the controller:
controller Cellular 0
  gsm sim profile slot 2 1
  gsm max-retry 1
  gsm failovertimer 1
If I activate a different sim, "cellular 0 gsm sim activate slot 1", it is still used 1 Profile

 

Frequent Contributor

have you gotgsm sim profile 1

have you got

gsm sim profile 1 slot 0

and

gsm sim profile 2 slot 1

on the controller cell 0

Beginner

I do not quite understand the

I do not quite understand the question. In the post above I wrote configuration controller Cellular 0.

controller Cellular 0
  gsm sim profile 2 slot 1
  gsm max-retry 1
  gsm failovertimer 1

 

gsm sim profile 1 slot 0 - it was written, but not displayed

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards