Hi guys,For the purposes for NAT overload, if had my "outside" interface as Gi0/0 and my "inside" interface as VLAN120; and I wanted to police ingress traffic to an IP address in VLAN120 using an ACL with the inside local address as the destination.....
Hello, are there any specific setting needed on a Cisco 2900 router to use Aironet 1100/1200 series access points? thanks, Ron
I was studying OSPF, and I had a thought. Is there ALWAYS a DR and BDR in an OSPF network? Any feedback is appreciated.
I ran into this question while studying OSPF: True or false: OSPF uses the shortest total path metric to identify the best path for every internal OSPF route (intra-area andinterarea).a. Trueb. FalseAnswer: False I was a bit confused. Is it false, be...
Hello, I have a question regarding VLANs. If I have connected two switches with VLANs through router, can I on router "see" data on other router port. Example, on Switch1 (VLAN10) is connected IP camera 1, on Switch2 (VLAN20) is connected IP camera 2...
HI,I configured a topology with L3 SVI 10.10.10.0/24 PCs10.10.20.0/24 PCs10.10.30.0/24 PCs192.168.5.0/24 DHCP server192.168.66.0/24 ASA inside I use eigrp to distribute routes.Everything works as expected but not the firewall nat. I use autonat ...
Hi All,Need your advise on a BGP query.In many of my company's routers we have a BGP peer example peer ip: x.x.x.x however i am not able to find this subnet on any of the interface or loopback.Can anyone pls advise what kind of peer is that.
I stumbled upon this practice question while studying for the ENCOR exam: How does an EIGRP router indicate that a path computation is required for a specific route?a. EIGRP sends out an EIGRP update packet with the topology change notification flag...
Hi,Trying to troubleshoot an issue in which icmp traffic when originating behind one of the ASA subinterfaces does not go through (or better return) correctly when destination is behind this problematic interface. I originally identified the issue as...
I recently came across this question while studying for the ENCOR exam: Which of the following attributes does the EIGRP topology table contain? (Choose all that apply.)a. destination network prefixb. hop countc. total path delayd. maximum path bandw...
I am using XOR (ASR 9K). I need to display all the tags in the ospf routing table. Don't want to go to each specific routes and display it. I need to do some redistribution to BGP but need to know all the tagged routes in the table. Appreciate your h...
We have 4 VLANs. The first VLAN has to be connected with all three others. VLAN 2, 3 and 4 have to communicate with the first but not with each other. Is this possible with a layer 3 switch? And how?
Although the dmvpn is up, it have the packet loss when ping from R1 to R2. I think it could be MTU issue but I configure same MTU size in all routers. But ping success rate is 100% between R1 and R2. This ping loss lead to EIGRP neighbor flapping up ...
Dear All,I have attached our network architecture diagram. We are using inter-vlan routing for our ntework. DHCP pool for every Vlan is configure on core switch. Each aggregation switch using different VLAN. Some time network chok or hang due to broa...
Hi All, I'm looking for any advise on dynamic routing deployment.Basically two DCs connected with two ISPs and IPSec (per ISP) between. Each DC is sort of a 3 layer design which has a border (leaf) router, spine and leaf (ToR) design with vpc between...
