Router configuration

[Babybala69]

I'm trying to configure router 1841 with 2 system but it's no communicating 

In packet tracer it is working but in real its not working 

En 

Conf t

Int f0/0

Ip add 192.168.1.1

No shut

Int f 0/1

Ip add 192.168.2.1

No shut 

I have given gateway and Ip address to the system but I'm unable to ping the system

• From router I'm able to ping the two system
• From system 1 and 2 i can ping router ports 0 and 1
• But the system to system can't ping

[balaji.bandi]

EDIT

Looks like i misunderstand your configuration

make sure ip routing enabled

and PC do not have any Firewall

post below information from router :

show ip arp

show ip interface brief

show run | in routing

[M02@rt37]

Hello @Babybala69 

Do you configure Gateway on "system" ?

Each system need Gateway!

System 1 Gateway = 192.168.1.1

System 2 Gateway = 192.168.2.1

[Gopinath_Pigili · Accepted solution]

In windows os like Windows 10 ping communication is blocked by Windows firewall by default... You will be needed allow the ping communication...Please perform the following steps in both systems:

Search for Windows Firewall , and click to open it.

Click Advanced Settings on the left.

From the left pane of the resulting window, click Inbound Rules.

In the right pane, find the rules titled “File and Printer Sharing (Echo Request - ICMPv4-In)”.

Right-click each rule and choose Enable Rule.

Same way you have to enable the same rule under Outbound rules

Router side configuration and PC Ip address settings....seems fine...that is why I think windows firewall might be blocking ping communication....

Best regards
******* If This Helps, Please Rate *******

[MasoodA]

Hi,
Did you turn ip routing?

Conf t
Ip routing enter

Please let know if this does the trick.
Hth
Best Regards,

Masood

[Babybala69]

Hi sir 

I have done this 

But not working

From router I can ping both systems and system can ping the router but it's not ping the another system this is my problem 

I did the same configuration in packet tracer it's working there but in real it's not working 

[balaji.bandi]

As you made solution, that makes other member thinking this is resolved.

is this not resolved - then we asked some information :

make sure ip routing enabled

and PC do not have any Firewall

post below information from router :

show ip arp

show ip interface brief

show run | in routing