11-10-2009 06:14 AM - edited 03-04-2019 06:39 AM
When I boot the 2600 router i receive the message below:
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 32768 Kbytes of main memory
open: file "/c2600-j1s3-mz.123-26.bin" not found
open(): Open Error = -1
loadprog: error - on file open
boot: cannot load "flash:/c2600-j1s3-mz.123-26.bin"
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 32768 Kbytes of main memory
boot: cannot determine first file name on device "flash:"
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 32768 Kbytes of main memory
boot: cannot determine first file name on device "flash:"
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 32768 Kbytes of main memory
rommon 1 >
11-10-2009 06:32 AM
It appears that you do not have a valid IOS image on the flash.
Here is a URL that demonstrates how to TFTP an image to a 2600. I have used this and it works very well.
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008015bf9e.shtml
Here is a URL describing boot problems and how to resolve them.
HTH
11-10-2009 06:33 AM
Sorry, I didn't include the URL
http://www.cisco.com/en/US/docs/internetworking/troubleshooting/guide/tr1903.html#wp1021205
11-10-2009 07:14 AM
Here is some additional information about how to check flash from ROMMON mode to see what, if any, image is on the flash and boot from that image.
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a0080094a0b.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide