cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5540
Views
0
Helpful
3
Replies

Router ISR 4351 throughput speed

joaobor
Level 1
Level 1

Hello,

 

I have question on Cisco ISR 4351/K9 without any license can reach 200Mbps bidirectional (download and upload at same time or only 100Mbps each)?

 

Best regards

2 Accepted Solutions

Accepted Solutions

marce1000
Hall of Fame
Hall of Fame

 

 - Ref : https://www.cisco.com/c/en/us/products/collateral/routers/4000-series-integrated-services-routers-isr/data_sheet-c78-732542.html

                          Check Table 4

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

View solution in original post

Yes, correct, but also keep in mind, since it's an aggregate for the whole router, if down was, at that moment using only 75 Mbps, up could, at that moment, use up to 125 Mbps.

Oh, and to be clear, the up/down would normally be on different links.  Possibly it's easier to think of the bandwidth limit looks at all the traffic crossing the router's "backplane".

View solution in original post

3 Replies 3

marce1000
Hall of Fame
Hall of Fame

 

 - Ref : https://www.cisco.com/c/en/us/products/collateral/routers/4000-series-integrated-services-routers-isr/data_sheet-c78-732542.html

                          Check Table 4

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

So as I can understand the Aggregate throughput for an 4351 200Mbps is not bidirectional I can only get for example 100Mbps down and up at same time right?

Yes, correct, but also keep in mind, since it's an aggregate for the whole router, if down was, at that moment using only 75 Mbps, up could, at that moment, use up to 125 Mbps.

Oh, and to be clear, the up/down would normally be on different links.  Possibly it's easier to think of the bandwidth limit looks at all the traffic crossing the router's "backplane".