cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
252
Views
0
Helpful
2
Replies

Router unable to receive Ping

dukeminus
Level 1
Level 1

Here is my situation:

- have MPLS Network with 6 locations

- main router (10.20.0.1) ASA 5510

From the main router I can ping all other routers, None of the other routers can ping the main router. But all of the other routers can ping each other.

I tried to add the following line to the asa device "access-list INSIDE_ACCESS_OUT line 11 permit icmp host 10.20.0.1 any"

Please help....

2 Replies 2

lamav
Level 8
Level 8

Duke:

I have never worked with an ASA 5510, but I will treat it like a PIX, OK?

I am imagining that the remote routers sit behind the OUTSIDE (untrusted) interface of the ASA and so you have to specifically allow ICMP packets to enter the interface.

Something along the lines of 'permit icmp any 10.20.0.1'

It seems like you did it in the reverse.

Dont know if I am missing something obvious...

Thanks,

I will give it a try.

Review Cisco Networking for a $25 gift card