cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
263
Views
0
Helpful
1
Replies

RV042G VPN

dannimca1
Level 1
Level 1

Hello,

I have three routers connected in this way:

        - router 1 - Linksys RV042 - gateway to Internet

        - router 2 - RV042G  ( WAN connected to router 3, LAN connected to RV042 LAN )

        - router 3 - RV042G ( WAN connected to router 2 )

 

Router 2 is connected to router 3 by a fiber link ( using mediaconvertors ). Because the path of this fiber is not under control, traffic has to be encrypted. The simplest solution seems to make a VPN between this two. The Internet acces is only possible through router 1. All servers ( DC, DNS etc) are in LAN behind router 1 / router 2.

After VPN was created from LAN behind router 3 I can ping the computers ( by IP and by name ) from router 1/ router 2 LAN by I cannot access Internet ( ping to www.google.com return only the IP and no responses).

I tryed different settings for "advanced routing" but nothing seems to work.

 

Thank you!

 

 

 

1 Reply 1

dannimca1
Level 1
Level 1

"network diagram"

Review Cisco Networking for a $25 gift card