We have Cisco SCE 8000 with 4.2.0 software and following specs: 2x SCM-E, 4x10GE. We use following functions: policing, URL filtering with redirecting, RDR data collection.
We noticed that counter 'discarded packets' grows too quikly on network-side interfaces. Errors grow up when incoming traffic reaches 5.5Gbps (11Gbps of incoming traffic on both incoming interfaces). We also noticed, that troughput delay(round-trip time) grows with traffic load and 'discarded packets' counter.
We have tried to enable 'bypass mode' for the links, but no luck.
Is there anyone, who had such an issue, and solved it?
(Pdf copy at the bottom)
Segmentation within SD-Access is enabled through the combined use of both Virtual Networks (VN), which are analogous to VRFs, and Cisco Scalable Group Tags (SGTs). VNs, like VRFs, provide comp...
The 2020 IT Blog Awards, hosted by Cisco, is now open for submissions through October 16. Submit your blog, vlog or podcast today. For more information, including category details, the process, past winners and FAQs, check out: https://www.cisco...
Hello,We have a pair of N3K-3064PQ-10GX and one of them acting as backup and we want to migrate from VyOS to it, we want to add 500x interface vlan and each interface vlan has its own ip/prefixes (for example /30 /29 ...) and we ahve 6-8x BGP session with...
We live in an age that is both thrilling and evolving substantially. A new trend/technology is always on rise even before the preceding has been used to its fullest potential. Although the concepts of digital transformation may seem over discussed, ...
Show CommandPurposeCiscoICX-RuckusShow Spanning tree infoShow spanning-treeshow 802-1wVerify Port-Channel / Link aggregation infosh lag briefsh etherchannel summaryShow CDC/LDP neighbor infoshow cdp neighbors detailsh lldp neighbors de sh mac a...