We have Cisco SCE 8000 with 4.2.0 software and following specs: 2x SCM-E, 4x10GE. We use following functions: policing, URL filtering with redirecting, RDR data collection.
We noticed that counter 'discarded packets' grows too quikly on network-side interfaces. Errors grow up when incoming traffic reaches 5.5Gbps (11Gbps of incoming traffic on both incoming interfaces). We also noticed, that troughput delay(round-trip time) grows with traffic load and 'discarded packets' counter.
We have tried to enable 'bypass mode' for the links, but no luck.
Is there anyone, who had such an issue, and solved it?
Cisco Digital Network Architecture Center Modules (Design Module)Part.3In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module.Cisco DNA Center gives us the flexibility and scalability to configure mult...
Cisco 2509-RJ freezes during start-up I bought some Cisco 2509-RJ terminal server to work on my labs and was working fine. Today I turned it on and half way through starting up it seems to freeze. I can only find one instance of this happing to ...
Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con...
Connectivity Design considerations and recommendation
1.Management Access connectivity
If there is a dedicated OOB management path, consider connecting to CIMC and MGMT port.
If OOB path is not available, Connect the dedicated Management port to LAN Swi...