Hi Community
I do have a question about OSPF
If u look at the attachment you will find 2 loopbacks interface on Router R3
if I want to reach the Loopback0 and Loopback1 from R5 the path will be R5-R1-R3
Is it possible to change the path only for one Loopback and keeping the same old path for other Loopback
example
R5 to Loopback 0 will go throuth R3
R5 to Loopback 1 will go through R1-R3
I can do this with Static Route but i hope if you have another suggestions.
Thanks in Advanced