Hello I am currently having trouble translating a configuration on a serial interface from a C3900-SPE150 to a C8300-1N1S-6T
The current configuration on the C3900 on the serial interface is as follows:
ip address X.X.X.X 255.255.255.252
encapsulation ppp
keepalive 8
dsu bandwidth 44210
scramble
serial restart-delay 0
All the commands except the **dsu bandwidth** and **scramble** commands translate to the C8300
I am able to set a bandwidth but not a DSU bandwidth specifically and the only thing I can find in the configuration manual for scramble is for Packet-over-SONET interfaces. Anyone have any ideas on a solution to this?
