SFP-10G-SR shutting down port 0/0/3 automatically on ASR-920-4SZ

[kdsingh007]

I have inserted

SFP-10G-SR to  port te0/0/3  on ASR-920-4SZ

and found that it shuts down the port automatically. This

ASR 920

has 1 gig license. does it mean that this

sfp

is not compatible? 

IDPROM for transceiver TenGigabitEthernet0/0/3:
Description = SFP or SFP+ optics (type 3)
Transceiver Type: = SFP+ 10GBASE-SR (273)
Product Identifier (PID) = SFP-10G-SR
Vendor Revision = 1.0
Serial Number (SN) = xxxxxxxxx
Vendor Name = xxxxx
Vendor OUI (IEEE company ID) = xxxxx
CLEI code = xxxxxxx
Cisco part number = xxxxxx
Device State = Enabled.
Date code (yy/mm/dd) = 22/08/11
Connector type = LC.
Encoding = 64B/66B (6)
Nominal bitrate = (10300 Mbits/s)
Minimum bit rate as % of nominal bit rate = not specified
Maximum bit rate as % of nominal bit rate = not specified


R2#sh facility-alarm status
System Totals Critical: 1 Major: 0 Minor: 0

Source Time Severity Syslog String Description [Index]
------ ------ -------- ------------- -------------------
GigabitEthernet0 Sep 14 2023 02:21:51 CRITICAL ETHERNET_PORT_LINK_DOWN Physical Port Link Down [1]
GigabitEthernet0/0/0 Sep 14 2023 14:58:53 INFO ETHERNET_PORT_ADMIN_DOWN Physical Port Administrative State Down [2]
GigabitEthernet0/0/1 Sep 14 2023 14:58:53 INFO ETHERNET_PORT_ADMIN_DOWN Physical Port Administrative State Down [2]
TenGigabitEthernet0/0/3 Sep 14 2023 14:58:53 INFO ETHERNET_PORT_ADMIN_DOWN Physical Port Administrative State Down [2]


OR# sh license
Index 1 Feature: advancedmetroipaccess
Period left: Not Activated
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 2 Feature: metroipaccess
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 3 Feature: metroaccess
Period left: Not Activated
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 4 Feature: 1588
Index 5 Feature: 10GEupgradelicense
Index 6 Feature: 2portGE-4ports10GE

[Ramblin Tech]

The 10G license is needed to support a

10G SFP+ like the SFP-10G-SR

[M02@rt37 · Accepted solution]

Hello @kdsingh007,

SFP+ 10G SR

is compatible with your Router. You need 10G license.

--see Table 1:

https://content.cisco.com/chapter.sjs?uri=/searchable/chapter/content/en/us/td/docs/routers/asr920/configuration/guide/csa/csa-xe-3-13s-asr-920-book/csa-xe-3-13s-asr-920-book1G-10G-ports.html.xml

There are 4*10G ports that operate in 1G mode by default. To operate in 10G mode, you have to activate

10 GigabitEthernet Upgrade license

with single bundle or two bundles.