06-09-2009 08:14 AM - edited 03-04-2019 05:02 AM
Hi, Im trying to apply something like this in interface "GigabitEthernet over SIP-400:
!
class-map match-all SHAPING
match any
!
policy-map SHAPE-1000
class SHAPING
shape average 1000000000 10000000 0
but is no possible because the BC...
"Shape sustained burst (bc) cannot be configured this interface"
there is another way to apply the policy map? The router is a 7604.
Thanks in advance.
06-09-2009 09:19 AM
Hi,
Configuring Bc value is not supported on the SIP-400. You need to let the router calculate it for you (do not enter any value).
HTH
Laurent.
06-10-2009 05:05 AM
Hi Laurent, humm dont work on the SIP-400, but I also have GLCs... 2 ports at GigaEthernet, if I apply do them dont work also :) is normal?
Thanks one more time.
06-09-2009 01:34 PM
Changing Bc is not supported on sip-400 shaping. If you want to control
buffering you can configure queue-limit on the shaping class.
Franco
06-10-2009 04:59 AM
Thanks for your answer.
The Link is 1Gb, can I apply:
!
class-map match-all SHAPING
match any
!
policy-map SHAPE-1000
class SHAPING
bandwith 1000
queue-limit 10
!
10 for queue-limit is ok?
Thanks in advance.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide