%SHDSL_EA_IPC-7-IPCMSGFAILED

[Wassim Aouadi]

Hi,

We are getting the following error message on a CPE router:

*Jul 31 07:30:39.139 CET: %SHDSL_EA_IPC-7-IPCMSGFAILED: SHDSL 0/1/0 type(1) IPC Send ERROR
*Jul 31 07:30:40.139 CET: %SHDSL_EA_IPC-7-IPCMSGFAILED: SHDSL 0/1/0 type(1) IPC Send ERROR

It's a SHDSL interface on a Cisco router that connects to the provider. It worked fine in the past.

Interface status:

Ethernet0/1/0 is up, line protocol is down 
  Hardware is HWIC_MAC110_FE, address is 6c41.6abb.9fd0 (bia 6c41.6abb.9fd0)
  Internet address is 192.168.205.114/28
  MTU 1500 bytes, BW 512 Kbit/sec, DLY 19500 usec, 
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 2w4d, output 1d22h, output hang never
  Last clearing of "show interface" counters 5w6d
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 114380
  Queueing strategy: Class-based queueing
  Output queue: 0/1000/0 (size/max total/drops)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     12265112 packets input, 3184183106 bytes, 0 no buffer
     Received 0 broadcasts (0 IP multicasts)
     0 runts, 0 giants, 0 throttles 
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 input packets with dribble condition detected
     13922941 packets output, 2486028314 bytes, 0 underruns
     0 output errors, 0 collisions, 3 interface resets
     0 unknown protocol drops
     0 babbles, 0 late collision, 0 deferred
     5 lost carrier, 0 no carrier
     0 output buffer failures, 0 output buffers swapped out

Interface type:  EHWIC-4SHDSL-EA

Could it be a L2 misconfiguration or an error made on the provider DSLAM side?

Any idea?

[alesuarez]

Buenas, tengo la misma falla, alguien encontró información al respecto?

gracias.

Sep  9 15:12:05.923: %SHDSL_EA_IPC-7-IPCMSGFAILED: SHDSL 0 type(2) IPC Send ERROR
*Sep  9 15:27:06.335: SCORE_ERR: score_ipc_send_msg_socket 251 Send failed, socket down
*Sep  9 15:27:06.335: %SHDSL_EA_IPC-7-IPCMSGFAILED: SHDSL 0 type(2) IPC Send ERROR
*Sep  9 15:42:06.750: SCORE_ERR: score_ipc_send_msg_socket 251 Send failed, socket down
*Sep  9 15:42:06.750: %SHDSL_EA_IPC-7-IPCMSGFAILED: SHDSL 0 type(2) IPC Send ERROR
*Sep  9 15:57:07.169: SCORE_ERR: score_ipc_send_msg_socket 251 Send failed, socket down
*Sep  9 15:57:07.169: %SHDSL_EA_IPC-7-IPCMSGFAILED: SHDSL 0 type(2) IPC Send ERROR
*Sep  9 16:12:07.584: SCORE_ERR: score_ipc_send_msg_socket 251 Send failed, socket down
*Sep  9 16:12:07.584: %SHDSL_EA_IPC-7-IPCMSGFAILED: SHDSL 0 type(2) IPC Send ERROR
*Sep  9 16:27:07.991: SCORE_ERR: score_ipc_send_msg_socket 251 Send failed, socket down
*Sep  9 16:27:07.991: %SHDSL_EA_IPC-7-IPCMSGFAILED: SHDSL 0 type(2) IPC Send ERROR
*Sep  9 16:42:08.402: SCORE_ERR: score_ipc_send_msg_socket 251 Send failed, socket down
*Sep  9 16:42:08.402: %SHDSL_EA_IPC-7-IPCMSGFAILED: SHDSL 0 type(2) IPC Send ERROR
*Sep  9 16:57:08.813: SCORE_ERR: score_ipc_send_msg_socket 251 Send failed, socket down
*Sep  9 16:57:08.813: %SHDSL_EA_IPC-7-IPCMSGFAILED: SHDSL 0 type(2) IPC Send ERROR
 

ROUTER#sh ver
Cisco IOS Software, C800 Software (C800-UNIVERSALK9-M), Version 15.4(3)M2, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Fri 06-Feb-15 22:12 by prod_rel_team

ROM: System Bootstrap, Version 15.4(1r)T1, RELEASE SOFTWARE (fc1)

ROUTER uptime is 6 days, 2 hours, 8 minutes
System returned to ROM by power-on
System image file is "flash:c800-universalk9-mz.SPA.154-3.M2.bin"
Last reload type: Normal Reload
Last reload reason: power-on



This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco C888-K9 (revision 1.0) with 357452K/35763K bytes of memory.
Processor board ID FTX190881TA
1 DSL controller
1 Ethernet interface
4 FastEthernet interfaces
1 ISDN Basic Rate interface
1 ATM interface
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 32 bits wide
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash (Read/Write)