hello guys,   I have ACI Hardware lab reservation. I could connect successfully to Cisco network using Cisco VPN client. But I am unable to access the APIC server 10.10.20.42 neither through HTTPS nor through SSH. Could you please help?       ... View more

Hi, In CVOICE Foundation Learning Guide by Kevin Wallace, page 443, table 5-5 talks about the order of operation of voice translation profiles, both for inbound and outbound directions. It is mentioned that voice translation profiles applied globally are processed before those which are applied at the dial peer level. I already know how to configure global voice translation profile for inbound voip call legs (with voip-incoming translation-profile ...). My question is what is the command to configure outbound global voice translation profile? Thanks ... View more

Hi, I am finding issues registering a 3725 router to a single node CUCM. The IOS gateway is stuck in "Registering With CM". The TFTP download process is successful and the configuration download is successful (see attached file) and the configuration on CUCM seemed good to me (the attached screenshot). I configured no MGCP endpoints on the gateway. I restarted the following services: TFTP, Call Manager, RIS data collector. I restarted the MGCP process on the gateway. IP communication is established between the gateway and the CUCM. Gateway IOS version 12.4(15)T5. CUCM version 8.6.2 network setting: GW (192.168.2.135) --- CUCM (192.168.2.250) Your suggestions please. ... View more

Hi, We have redundant links to the WAN provider. We are trying to make them work but we get a routing loop between router A, router B and Provider routers, everytime both links are up. Both routers A and B are in the same OSPF area. Each router has a WAN connection to WAN provider   The ideal situation is : when both links are up, router B does not announce routes to the provider. The provider suggested to implement some route filtering. I'm trying to filter OSPF routes coming from router A to router B (backup). To this moment, I found a way to do it with Prefix lists and distribute lists on router B. However, doing so is like a "hard" filter: router B will never install certain routes, even when link A fails.   I know that link states propagate across all routers in an OSPF domain, so filtering routes is just a matter of preventing them to be installed in the routing table. But is there a way to "dynamically" filter routes on router B when link A is up and install them when link A is down? Is there a way to prevent router B from advertising them to the provider WAN and thus preventing a loop?   ... View more