cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
799
Views
0
Helpful
2
Replies

show ip route profile

musthafa786
Level 1
Level 1

Hi,

I just enabled ip route profile in my router to verify routing loops or any abnormality in routing table, Below is output of show ip route profile ,

I can see only prefix refresh is changing , What does it mean  ? Is this need to consider routing table as inconsistent?

Could anyone put more detial on this ? thanks.

R1# show ip route profile

IP routing table change statistics:

Frequency of changes in a 5 second sampling interval

-------------------------------------------------------------

Change/   Fwd-path  Prefix   Nexthop  Pathcount  Prefix

interval  change    add      change   change     refresh

-------------------------------------------------------------

0         72        72       72       72           70

1         0          0         0         0             0        

2         0          0         0         0             0        

3         0          0         0         0             2        

4         0          0         0         0             0        

5         0          0         0         0             0        

10        0         0         0         0             0        

15        0         0        0          0             0      

output truncated

Regards,

Musthafa

2 Replies 2

musthafa786
Level 1
Level 1

Could anyone help on this ?

Hello Mohammed,

Prefix Refresh

- Standard routing table maintenance; the forwarding behavior is not changed.

For more info:

http://packetlife.net/blog/2010/jan/4/routing-table-profiling/

http://www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfindp2.html#wp1058095

Best Regards

Please rate all helpful posts and close solved questions

Best Regards Please rate all helpful posts and close solved questions
Review Cisco Networking for a $25 gift card