SIP-200 Combination

[wilsonsant]

Hi Guys,

Anybody have Idea how I can to do the combination SIP-200? I have the bellow scenario:

NAME #sh module 13

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

13 0 4-subslot SPA Interface Processor-200 7600-SIP-200 JAE1050GWWF

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

13 0019.0656.fb00 to 0019.0656.fb3f 1.3 12.2(33)SRB3 12.2(33)SRB3 Ok

Mod Sub-Module Model Serial Hw Status

---- --------------------------- ------------------ ----------- ------- -------

13/0 1xCHSTM1 SPA SPA-1XCHSTM1/OC3 JAB105105HQ 2.0 Ok

13/1 2xOC3 ATM SPA SPA-2XOC3-ATM JAE1139Y4OJ 1.1 Ok

13/2 1xCHSTM1 SPA SPA-1XCHSTM1/OC3 JAE11430YET 2.0 Ok

It's possible attach another 1XCGSTM1/OC3 in this Slot?

Thank You,

Wilson

[Jerry Ye]

Hi, I will assume so, since you only use up 3 slots. However, I am not sure about the performance, please check with your Cisco account team for more info.

The only statement I found on the data sheet is

"Four SPA bays per Cisco 7600 SIP-200. The SIP-200 supports oversubscription."

http://www.cisco.com/en/US/prod/collateral/routers/ps368/product_data_sheet0900aecd8027c9df.html

HTH,

jerry