03-27-2014 10:13 PM - edited 03-04-2019 10:40 PM
I am trying to extract the numerical value from the followng using Embedded event manager(TCL Scripting)
i also have SLA probes running between 2 connected routers
sho ip sla statistics | sec SD Jitter
So i write the the following
conf ter
event manager applet STAT
event none sync yes
action 1 cli command "enable"
action 2 cli command "sho ip sla stat | sec SD Jitter"
action 3 regexp " [0-9]+ " $_cli_result result
action 4 puts "$result"
However it produces result
*Mar 27 16:42:08.806: %HA_EM-3-FMPD_UNKNOWN_ENV: fh_parse_var: could not find environment variable: result
*Mar 27 16:42:08.806: %HA_EM-3-FMPD_ERROR: Error executing applet STAT statement 4
pls clarify
Solved! Go to Solution.
03-28-2014 01:42 AM
Could you try with this combination:
action 2 cli command "sho ip sla stat | sec SD Jitter"
action 3 regexp "[0-9]+" "$_cli_result" result
action 4 puts $result
HTH,
Dragan
03-28-2014 01:42 AM
Could you try with this combination:
action 2 cli command "sho ip sla stat | sec SD Jitter"
action 3 regexp "[0-9]+" "$_cli_result" result
action 4 puts $result
HTH,
Dragan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide