04-28-2013 05:44 AM - edited 03-04-2019 07:44 PM
Hi all,
i have some issue while adding cisco switches on solarwinds.......from my switch i can ping solarwinds server but when i put the snmp community credentials in solarwinds and test it, i'm not able to test it successfuly
snmp-configuration on switch
snmp-server community V!3w#r RO 80
snmp-server community wR!t#r RW 80
snmp-server trap-source Vlan1111
kindly find the attached snapshot of solarwind configuration
Solved! Go to Solution.
04-28-2013 07:49 AM
Hello Salman,
I see that you have an access-list 80 applied to your community strings... So only the IP's that are permitted in the ACL can access it properly.
snmp-server community V!3w#r RO 80
snmp-server community wR!t#r RW 80
Could you tell me what the ip address of the Solarwinds NPM - im guess its 192.6.14.196? And show us the access-list 80. You can do this like 'show ip access-list 80' - This IP should be permitted.
Hope this helps
Please rate useful posts and remember to mark any solved questions as answered. Thank you.
04-28-2013 07:49 AM
Hello Salman,
I see that you have an access-list 80 applied to your community strings... So only the IP's that are permitted in the ACL can access it properly.
snmp-server community V!3w#r RO 80
snmp-server community wR!t#r RW 80
Could you tell me what the ip address of the Solarwinds NPM - im guess its 192.6.14.196? And show us the access-list 80. You can do this like 'show ip access-list 80' - This IP should be permitted.
Hope this helps
Please rate useful posts and remember to mark any solved questions as answered. Thank you.
04-30-2013 06:40 AM
@bilal Nawaz
thanks for the reply
yes u r right 192.6.14.196 was not permited in the ACL and i have added that in ACL
now it is working fine
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide