We have requirement to stream couple of multicast streams through MPLS cloud to remote sites.
Here is the setup.
Encoder-L2 Switch-WAN CPE-MPLS WAN-WAN CPE-L2 Switch-Decoder
We dont have testing environment to verify the configs.
i am looking to verify the templates i have created for CPE and L2 Switches.
CPE Router:
ip multicast-routing
ip pim ssm default
interface x
description WAN
ip pim sparse-mode
interface y
description lan
ip pim sparse-mode
ip igmp version 3
L2 Switch Configurations.
ip igmp snooping
ip igmp snooping vlan <multicast vlan id>
interface x
description uplink to router
ip igmp version 3
interface y
description to decoder
ip igmp join group <group> source <ip> <-- repeat for all sources/groups
ip igmp version 3
interface z
description to encoder
ip igmp version 3
Please help me review the configurations. We have got 2960-x switch in lan side configured as L2 mode. WAN CPE is the gateway for all lan segments.
Regards,
Mohit Kumar
