Hello,
I have two 7304 routers. One is in service and works fine taking a ds3 and dividing that up into several T1 connections going out to remote locations. I recently received another 7304 router, but inadvertantly ordered the wrong part. Instead of ordering a PA-MC-T3= (SW) as I have in the original. I have a SPA-2XT3/E3. Can anyone direct me to some documentation that I can use to set this up to take a ds3 connection and separate it out into multiple T1's. Something like this (IOS version is 12.2(33)SB1):
controller T3 2/0
t1 1 channel-group 0 timeslots 1-24
t1 2 channel-group 0 timeslots 1-20
.
.
.
interface Serial2/0/1:0
description 1544k to location1
bandwidth 1544
ip address 192.168.0.1 255.255.255.252
encapsulation ppp
fair-queue
bridge-group 1
!
interface Serial2/0/2:0
description 1120k to location2
bandwidth 1120
ip address 192.168.0.5 255.255.255.252
encapsulation ppp
fair-queue
bridge-group 1
.
.
.
Thanks,
Will