SR 4451

[hien.tran2.mil]

I have fiber run on port g0/1/0 on this ISR 4451 to a switch. Is there a way only allow 10MB traverse on this port. Thanks 

[balaji.bandi]

Try the below example :  ( i do not have Router in hand to test)

https://www.cisco.com/c/en/us/td/docs/routers/access/800M/software/800MSCG/QoS.html

Also not sure at this stage srr-queue can be used here :

(config)# interface g0/1/0

(config-if)# srr-queue bandwidth limit 99

https://www.cisco.com/c/en/us/td/docs/switches/lan/Denali_16-1/ConfigExamples_Technotes/Config_Examples/Misc/qos/m_qos_monitoring.html