05-08-2023 01:47 AM
I am trying to do static routing along with RIP. There are 3 routers that use RIP and are connected to main router (where I am trying to do Static routing). I am new to cisco packet tracer and do not have networks knowledge. If any one can help me that would be great. Thanks for any help.
I have attached the pkt file. The main router also has another network connected that has servers in it.
05-08-2023 02:00 AM
No one anymore use RIP use ospf or eigrp. Dont waste your time with this protocol.
05-08-2023 06:55 AM
I am a beginner and it is must to use static and RIP for my project. I will though have a look at what you told. Thanks for sharing
05-08-2023 02:50 AM
Hello @faniAhmed
Take a look on the file I am attaching.
You can see that the advantage of a dynamic routing protocol is that it is easier to deploy (less work to do) and easier to maintain.
05-08-2023 07:13 AM
The network 192.168.(1/2/3).0 are working from the 193.168.1.0 network. But the 194 (right most) and the 10 (server one) are not working. I removed the RIP from the pkt you provided because I can not use RIP in the main router. It is though working with the RIP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide