stm-1 card is installed in 7606 router. while making the stm-1 card operational following defects are shown:
SONET 2/1/0 is down.
Channelized OC-3/STM-1 SMI PA
H/W Version : 24.257.2.5, ROM Version : 1.2
FREEDM version : 2, F/W Version : 1.19.0
Applique type is Channelized Sonet/SDH
Clock Source is Line, AUG mapping is AU4.
Medium info:
Type: SDH, Line Coding: NRZ, Line Type: Short SM
Regenerator Section Status:
No alarms detected.
Multiplex Section Status:
No alarms detected.
No BER failure/degrade detected
BER_SF threshold power : 3
BER_SD threshold power : 6
Higher Order Path Status:
Path# 1 has defects HP-UNEQ HP-PLM
how to rectify this so that stm-1 becomes operational
