When I put a summary address in for the interface below my routes disappear on my far eigrp neighbor.
ip summary-address eigrp 8882 0.0.0.0 0.0.0.0
!
router eigrp 8882
!
address-family ipv4 vrf ######
network 10.9.2.0 0.0.0.255
autonomous-system 8882
exit-address-family
!
interface Tunnel0
bandwidth 1000
ip vrf forwarding #######
ip address 10.9.2.5 255.255.255.0
no ip redirects
ip mtu 1400
ip nhrp authentication I#######
ip nhrp map multicast dynamic
ip nhrp network-id 100000
ip nhrp holdtime 360
ip tcp adjust-mss 1360
delay 1000
tunnel source GigabitEthernet0/0/3
tunnel mode gre multipoint
tunnel key 100000
tunnel path-mtu-discovery
tunnel vrf ####
tunnel protection ipsec profile ########