cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
233
Views
0
Helpful
1
Replies

svi for vlan

sarahr202
Level 5
Level 5

hi everybody!

I just want to know if we have to use" no shutdown" command or not in follwing config:

switch(config) vlan 100

switch(confg-vlan) name zee

switch(Config-vlan) exit

switch(config) int vlan 100

switch(config) ip address 10.10.10.10 255.255.255.0

Is this interface being virtual up by default?

thanks !

1 Accepted Solution

Accepted Solutions

Edison Ortiz
Hall of Fame
Hall of Fame

Is this interface being virtual up by default?

It depends on the hardware.

Catalyst 3550, 3560 and 3750 are up by default.

Catalyst 4500 and 6500 are shutdown by default.

And even within the above mentioned hardware the behavior may be different in different IOS. The ones I tested came up with my findings from above.

When in doubt, a quick show ip int brief is recommended.

HTH,

__

Edison.

View solution in original post

1 Reply 1

Edison Ortiz
Hall of Fame
Hall of Fame

Is this interface being virtual up by default?

It depends on the hardware.

Catalyst 3550, 3560 and 3750 are up by default.

Catalyst 4500 and 6500 are shutdown by default.

And even within the above mentioned hardware the behavior may be different in different IOS. The ones I tested came up with my findings from above.

When in doubt, a quick show ip int brief is recommended.

HTH,

__

Edison.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card