Hi,
Can help me please, i have the next message on my Cisco 7600:
Mar 4 15:56:36: %CONST_DIAG-SP-6-HM_TEST_SP_INFO: TestMacNotification[9]: last_busy_percent[14%], Tx_Rate[7696], Rx_Rate[906]
Mar 4 15:56:54: %HA_EM-6-LOG: Mandatory.go_mac.tcl: GOLD EEM TCL policy for TestMacNotification
Mar 4 15:57:12: %HA_EM-6-LOG: Mandatory.go_mac.tcl: GOLD EEM TCL policy for TestMacNotification
Mar 4 15:57:34: %HA_EM-6-LOG: Mandatory.go_mac.tcl: GOLD EEM TCL policy for TestMacNotification
Mar 4 15:57:52: %HA_EM-6-LOG: Mandatory.go_mac.tcl: GOLD EEM TCL policy for TestMacNotification
With the "show module" i see in the module 9 the DFC Fail,
PE# sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 2 7600 ES+ 7600-ES+2TG3C JAE1327DBUK
2 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX SAL1446ZFDU
3 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX SAL11456FBE
4 48 48-port 100FX SFP Ethernet Module WS-X6148-FE-SFP SAD090803B7
5 2 Route Switch Processor 720 (Active) RSP720-3C-GE JAE145105UG
6 2 Route Switch Processor 720 (Hot) RSP720-3C-GE JAE145104L3
7 48 CEF720 48 port 1000mb SFP WS-X6748-SFP SAL14028EKN
8 48 CEF720 48 port 1000mb SFP WS-X6748-SFP SAL14028EKE
9 48 CEF720 48 port 1000mb SFP WS-X6748-SFP SAL14028EPP
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0024.f94d.bc60 to 0024.f94d.bc6f 1.3 12.2(33r)SRD 15.0(1)S6 Ok
2 c471.fe64.2d70 to c471.fe64.2d9f 4.1 8.4(1) 8.7(0.22)FW2 Ok
3 001e.13f8.8ef0 to 001e.13f8.8f1f 1.6 8.4(1) 8.7(0.22)FW2 Ok
4 0013.c427.3e00 to 0013.c427.3e2f 3.0 8.4(1) 8.7(0.22)FW2 Ok
5 68ef.bdd3.7804 to 68ef.bdd3.7807 5.12 12.2(33r)SRD 15.0(1)S6 Ok
6 e05f.b9ad.188c to e05f.b9ad.188f 5.12 12.2(33r)SRD 15.0(1)S6 Ok
7 0026.990b.eb88 to 0026.990b.ebb7 2.3 12.2(18r)S1 15.0(1)S6 Ok
8 0027.0dc5.6ebc to 0027.0dc5.6eeb 2.3 12.2(18r)S1 15.0(1)S6 Ok
9 0027.0d78.9aa0 to 0027.0d78.9acf 2.3 12.2(18r)S1 15.0(1)S6 MajFail
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 7600 ES+ DFC LITE 7600-ES+3C JAE1325CHWK 1.1 Ok
1 7600 ES+ 2x10GE XFP 7600-ES+2TG JAE1326DAJH 1.1 Ok
5 Policy Feature Card 3 7600-PFC3C JAE1451014Q 1.2 Ok
5 C7600 MSFC4 Daughterboard 7600-MSFC4 JAE145105C4 1.6 Ok
6 Policy Feature Card 3 7600-PFC3C JAE1452088S 1.2 Ok
6 C7600 MSFC4 Daughterboard 7600-MSFC4 JAE145205Q2 1.6 Ok
7 Distributed Forwarding Card WS-F6700-DFC3C SAL140394UN 1.4 Ok
8 Distributed Forwarding Card WS-F6700-DFC3C SAL1405A19N 1.4 Ok
9 Distributed Forwarding Card WS-F6700-DFC3C SAL1405A195 1.4 MajFail
It could be a BUG? or is a hw problem? I used a new chassis and I had the same problem.
Used also other WS-X6748-SFP and I had the same problem only occurs in that slot.
