02-11-2013 07:14 AM - edited 03-04-2019 06:59 PM
Hello,
We currently are using 2811 router for internet Via IPSEC tunnel.
Download speed is 30 Mbps and Upload speed is 6 Mbps.
But we are getting not more than 4 Mbps download speed. We did open Tac case and as per Tac 2811 router is not for 30 Mbps.
Can any suggest proper model. We need 2 FastEthernet/Gig and one serial port.
Arun
02-11-2013 07:48 AM
Hello Arun,
C1921 with SEC license should do the job.
Hope to help
Giuseppe
02-11-2013 11:13 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
A 2811 is unlikely to support 30 Mbps encrypted, but I would expect it to do better than 4 Mbps. I wonder whether your configuration has everything for optimal performance.
I've attached a Cisco whitepaper which discusses later ISR performance.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide