07-12-2007 02:16 AM - edited 03-03-2019 05:50 PM
Hi
I want to know which traffic(ip,tcp,udp etc.) utilizing atm interface(pvc) most or how much?
Regards
Om
07-12-2007 02:20 AM
For an accurate monitoring, try netflow
http://cisco.com/en/US/tech/tk812/tsd_technology_support_protocol_home.html
with an an external analyzer like PRTG.
For a poor man solution, configure access list with permit ip udo, etc. and do show to see the packet counters.
hope this helps, please rate post if it does!
07-12-2007 02:55 AM
Hi,
you can also use NBAR protocol discovery to get an application level view at the traffic through an interface. Have a look at "Enabling Protocol Discovery"
http://www.cisco.com/en/US/products/ps6441/products_configuration_guide_chapter09186a008064fb50.html
Hope this helps! Please rate all posts.
Regards, Martin
07-12-2007 03:15 AM
try AdventNet Netflow traffic analyser. easy to configure for a newbie.. and u can try it out for 30 days . it does NBAR protocol discovery too..
07-12-2007 03:41 AM
Good..but i want the source ip and detination ip of the traffic .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide