03-22-2005 02:33 PM - edited 03-03-2019 09:07 AM
Could someone tell me what the command
Solved! Go to Solution.
03-22-2005 03:11 PM
The link below is very self explanatory.
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009437d.shtml
I have used the commands only in labs.
Traffic-share balanced is the default setting. So this means, that by just enabling "variance" command you will have a balanced traffic sharing.
Traffic-share min is a configurable setting and is useful in situations where you have a DS3 and a T1 connecting two routers (say). You want both links to be used for load balancing, but the preferred path is the DS3.
I think "traffic-share balanced" was designed as an equivalent command to turn off "traffic-share min"
traffic-share balanced = no traffic-share min
03-22-2005 03:11 PM
The link below is very self explanatory.
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009437d.shtml
I have used the commands only in labs.
Traffic-share balanced is the default setting. So this means, that by just enabling "variance" command you will have a balanced traffic sharing.
Traffic-share min is a configurable setting and is useful in situations where you have a DS3 and a T1 connecting two routers (say). You want both links to be used for load balancing, but the preferred path is the DS3.
I think "traffic-share balanced" was designed as an equivalent command to turn off "traffic-share min"
traffic-share balanced = no traffic-share min
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide