09-21-2012 06:13 AM - edited 03-04-2019 05:38 PM
Good day and Thanks in advance for your help.
Reading about FlexStack modules I had a couple of doubts , maybe this is not the correct section , if it isn't I apologize.
The first one:
Is the FlexStack form factor standard? For being precise, does it suits in every switch compatible with a FlexStack module or every switch has its own module?
The second one:
Two switch with different number of port (ex: 24 with 48) may be stacked? Can I stack a 24 port Switch with a 48 one?
Thanks again for your time
kind regards
Francesco
09-21-2012 10:59 AM
Hello Francesco,
FlexStack is the particular stack type supported on C2960-S switches.
So I would expect the cable format and the plug format to be specific of this type of switches.
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/qa_c67-577519.html
See the FlexStack section
>> Also, FlexStack cables have different connectors than the StackWise cables. (those of C3750)
Q. What is Cisco FlexStack stacking?
Stacking is supported only on Catalyst 2960-S switches running the LAN base image.
All member devices have to be C2960-S switches. The number of ports on each member switch is not relevant (this happens already for other stacks like C3750).
About the way to interconnect switch members with Flexstack cable you can use as a reference the figures 7-1 and 7-2 from the following Chapter on managing stacks from Configuration Guide of C2960 12.2 (58)SE
The cables have to form a dual ring so in the case of two member stacks the ports are closed between the two devices.
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide